PSP foam food container/box production line machine

PSP Foam Food Container/Box Vacuum Forming MachinePS Foam Food Container/Plate/Tray Making Machine , which can form lunch box from This line is the whole production line, which can form lunch box from raw material. The material is recycled. The work flow is as follows: raw material---(PS foam sheet extrusion

Featured Products

PSP Foam Food Container/Box Vacuum Forming Machine

PS Foam Food Container/Plate/Tray Making Machine , which can form lunch box from This line is the whole production line, which can form lunch box from raw material. The material is recycled. The work flow is as follows: raw material---(PS foam sheet extrusion line)---foam sheet---(lunch box forming machine and cutting machine)---lunch box---(plastic recycle machine)---plastic granulars( this part can be used as raw material)----foam sheet.

CE Certification and ISO 9001
PSP Foam Food Container/Box Production Line Machine

Detail photo for PS Plastic Foam Food Container/Plate/Tray Making Machine
PSP Foam Food Container/Box Production Line Machine


1. Main technical parameters

1)Model: FS-1000x1100
2)Forming area:1000×1100mm
Effective forming area:1000×1100mm
3)Product speed:3-5seconds/mould
4)Total power:140kw
5)Power supply:Three phase 380v/50Hz
6)Weight : 20T
7)Installation dimension:25x7×3m
8)Guide rail is made of stainless steel, more wear-resistant durable than aluminum alloy guide rail
9)The chain transmission, Omron servo control system, 4.5kw
10)The control mode:color screen

2 :Unwinding portion
1)Unwinding length:using photoelectric switch control
2)Unwinding mode:0.75kw turbine reducer motors
3)Feeding method:pneumatic feeding
4)Double feeding shaft alternately

3.Heating portion
1)Heating area:1100×2400(mm)
2)Heating mode:Ceramic tile radiation
3)Heating power:104kw
4)Heating box can be moved back and forth,convenient maintenance and remove the mold
5)Heating box full use of heat insulation material,heat preservation effect is good,power saving
6)Temperature control:intelligent temperature controller

4 Molding portion
1)Max forming area:1000×1100mm
2)Forming model:vacuum forming, press forming, mold forming, comprehensive forming
3)Forming depth :max60mm
4)Forming pressure:20t,adjustable
5)Machine control method:hydraulic control of the upper and lower mold alone
6)Hydraulic pump station with double vane pump,oil pump motor power:7.5 kw×2
7)The production efficiency:4-5 seconds/mold
8)Vacuum pump:adopting Zhuoxin water ring vacuum pump 
9)Vacuum tank capacity:118×2L
10)Working table stroke:using photoelectric switch automatic control

5 Cutting portion
1)Punching pressure: max60T
2)Punching mode:hydraulic automatic control
3)Punching machine with double vane pump ,oil pump motor power:11kw
4)Working table stroke:using photoelectric switch automatic control
5)Punching plate:high quality stainless steel
6)Punching area:1000X1100(mm)
7)Cutting area can move: driven by the motor,it is beneficial for changing the moulds and can save the time of changing moulds.

6 Stacking collection system
1)Control method:controlled by PLC
2)Stacking quantity:arbitrary,automatic stacking
3)Transmission mode :double conveyor belt transmission
4)Control mode:pneumatic control
5)Transmit power:0.55kw cycloid speed reducer

C Main parts and manufacturers of integrated machine
NumberNameOrigin or Brand
1 Guide pillarFushi
2 AC-motorsBoda
3 Actuating motorAonuo
4Hydraulic systemYuken
5 Vacuum pumpZhuoxin
6PLCMitsubishi,Japan
7 Touch screenEview
8Solid state relayYuyuan
9Gear motorZhejiang
 10Hydraulic cylinderYantai
11 Air cylinderHengyi
12 Electromagnetic valveAirtac
13 AC contactorSchneider
14ContactorPeople
15RelaySchneider
16Current transformerSchneider
17
Hollow far infrared heating slice
Jiangsu
18Intermediate relayYuyuan
19BearingHarbin
20ChainShanghai
21Frequency converterEura
22Guide railFushi
23Vacuum tankFushi
24Temperature-controlled meterOmron

D Utility requirements
1)The installed capacity:140kw
2)Wire with 50 square copper wire
3)Compressed air:0.6-0.8MPa
4)High anti-wear hydraulic oil:200kg
Tools and spare parts list for vacuum forming machine

NO.

Name

Quantity
1.12,14,17,19 Hex wrench 12, 14, 17,19each 1pc
2.Forked wrench1 pc
3.pressure gauge2pcs
4.Ampere meter4 pcs
5.Temperature controller4pcs
6.Knob2 pc
7.()Press button(red and green each two pcs)4pcs
8.Sealer for hydraulic pressure parts1 set
9.Proximity switch2 pcs
10.Photoelectric switch1 pc
11.Water line connecting gasketeach 5pcs
12.¢ 10mm\¢ 8mm¢ 10mm\¢ 8mm gas line tie-inEach 10 pcs
13.¢ 10mm\¢ 8mm¢ 10mm\¢ 8mm tee jointEach 5 pcs
14.Solid-state relay for forming machine4 pcs
15.¢ 10mm\¢ 8mm¢ 10mm\¢ 8mm gas lineeach 5m
16. Thermocouple3 pcs
17. Pressure air regulator1set
18. Vacuum magnetic valve1 set
19. Air blowing magnetic valve1set
20.Magnet of magnetic valve2pcs
21. Ceramic heater20pcs
22.oil gun1pcs
23.vacuum gauge1pc

Detail photos for PS Plastic Foamed Plastic Fast Food Container
PSP Foam Food Container/Box Production Line Machine
PSP Foam Food Container/Box Production Line Machine
PSP Foam Food Container/Box Production Line Machine

 

Packaging  & Shipping

After the machine is finished, we will pack it as following:  
PSP Foam Food Container/Box Production Line Machine
Shipping

1. From Qingdao Port

2. The delivery time is according to the machine that you order 

Payment  

1. T/T

2. L/C


Company Information

   Founded in 1994,Longkou Fushi Packing Machinery Co., Ltd. has developed CE certified Plastic Extrusion Machinery, Vacuum Forming Machine, Fruits Cleaning, Waxing&Grading Machine, PS/EPE foam Sheet Extrusion Line, EPE foam Net Extrusion Line, XPS Foam Board Extrusion Line, PE Cap Liner Foam Sheet Extrusion Line, PE/PS Recycling and Pelletizing Line, totally more than 20 kinds of machines, which are widely used in the fields of fruits making&processing, furniture packing, food, medical apparatus & pharmaceutical, electron, arts&crafts, construction industries, etc.

   We are one of the leading manufacturers of packing materials and related machinery. During 20 years of development, we are highly experienced in machinery manufacturing. With the market share expanding quickly year after year, the sales of our products are progressively increasing. The performance of our machinery is always on the leading place compared with the same products in the market depending on quality and price.
PSP Foam Food Container/Box Production Line Machine 

FAQ

1. Q:. Why I choose your company?

A:  1) We are one of the leading manufacturers of packing materials and related machinery .

2) Our company has made foam machine about 20 years with strong experience and advanced technique

3) Best Quality & Best Service with Competitive price1 year guarantee and lifetime maintenance

4) We have CE Certificate and ISO 9001:2008

5) We have Professional technical team, and will supply 24 hours service
 

2. Q: What should we prepare for PS foam food container production line?

A:You should prepare raw material(GPPS), workshop, water line, electric line, gas, compress air(if you need I can help you buy air compressor)

We would supply workshop layout drawing for you
 

3. Q: Where is your factory located? How can I visit there?

A: Our factory is located in Longkou city, Shandong province, you can fly to Yantai Penglai International Airport.When you confirm the flight No. and time, please tell me in advance then we will pick you up at Airport.
 

We are pleased to welcome domestic and overseas friends to visit us and cooperate with us.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours